Locators

Locator Product: DIGISYSTEM
 
 
With the DIGISYSTEM operators can locate, trace and mark underground services quickly, precisely and reliably prior to excavation.
Health and Safety authorities all over the world advise that before undertaking any kind of excavation operators should firstly scan an area with a Cable Avoidance Tool. Even with this advice, site workers are still injured and killed due to inadvertently striking buried cables. The DIGISYSTEM product family works to eliminate these sorts of risks on your site by removing the possibility for human error from the locating process using the latest in location technology. By introducing an automatic pinpointing facility to accurately locate the cable, always starting up in power mode and at maximum sensitivity the DIGISYSTEM takes away the need for awkward manual tuning, keeps you safer and locates faster.

  DIGICAT 100 Buried Service Locator

The DIGICAT 100 unit is designed to help avoid damage to underground services during excavation and is an easy to operate, fully automatic location system with the ability to manually tune if preferred.  Active signal tracing is available by using the DIGITEX signal generator.

   
  DIGICAT 200 Buried Service Locator with Depth Estimation

In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.

   
The Digicat 500i and 550i represent the latest design in cable location technology. With state-of-the-art digital signal processing (DSP) and intelligent software, the Digicat i-Series locators make ground surveys a simple and speedy task; increasing onsite safety and ultimately saving time and money.
The Digicat 500i and 550i locate buried conductive services by receiving electromagnetic signals which radiate from them. The Digicat's software interprets the signals and provides the operator with an audible and visual response to the position and direction of  the buried services.

Buried service location has never been so easy…
   
 

Digicat 500i locator
With its automatic controls and combined detection mode "Auto Mode" the Digicat 500i locator has been specifically designed to reduce human error during the location process. Combined with its precise and reliable service positioning, the Digicat 500i will prevent damage to underground services during excavation projects. Active signal tracing is available when using the Digitex 8/33 signal generator.

Available for 50 Hz or 60 Hz to suit your regions mains power frequency.

 

   

Digicat 550i locator
Contains the same functionality as the Digicat 500i, however it offers the added benefit of service depth estimation, when used in conjunction with the Digitex 8/33 signal generator or Sonde in 8/33 kHz mode.

Available for 50 Hz or 60 Hz to suit your regions mains power frequency. 

  Bluetooth Technology
The Digicat i-Series locators can be purchased with the added benefit of Bluetooth wireless connectivity, allowing  them to integrate seamlessly with mobile mapping technology to log survey data.
   
  Digitex 8/33 Signal Generator
Designed in conjunction with the Digicat locator, to easily and accurately trace the route of, or locate, an underground cable or metal pipe that does not carry a naturally present signal. The Digitex 8/33 generates a specific "active" signal, which can then be traced using the Digicat.


  Downloads
 
  Digicat 500i/550i
   
DIGISYSTM Brochure
 

Digicat 500i / 550i Feature Matrix

Features Digicat 500i Digicat 500i
with Bluetooth
Digicat 550i  Digicat 550i
with Bluetooth
High contrast LCD display  ✓
Automatic sensitivity adjustment  ✓
5 operating modes - including Auto Mode  ✓
Hazard Zone - shallow service warning  ✓
In-built user activated self test  ✓
Peak Assist Function  ✓
Bluetooth wireless data transfer      ✓
Service depth indication      ✓